07716427677

Category: Chimney Repairs Bromsgrove

The Hidden Risks of a Worn Chimney Crown

The Hidden Risks of a Worn Chimney Crown

The Hidden Risks of a Worn Chimney Crown – What Bromsgrove Roofs Are Telling Us

The chimney crown – the cement layer that sits on top of your chimney stack – often goes unnoticed until problems arise. At Back to Back Roofing, we’ve repaired countless chimney crowns in Bromsgrove that were quietly causing leaks, damp patches, and internal water damage without the homeowner even realising it.

If you haven’t had your crown inspected in years, it might be time to schedule a chimney crown inspection in Bromsgrove before more serious problems develop.

What Is the Chimney Crown?

The crown is a sloped layer of mortar or concrete that seals the top of the chimney stack. Its job is to prevent rainwater from seeping into the brickwork and down the flue.

What Happens When It Wears Out?

  • Cracks form that allow water into the stack
  • Rainwater seeps down the flue causing damp fireplaces or stains
  • Moisture damages chimney lining or causes brickwork to crumble

How We Fix It

We remove the damaged crown and rebuild it using frost-resistant, waterproof mortar. A properly finished crown includes an overhang to direct water away from the brickwork below. We can also fit chimney caps to further enhance protection.

Warning Signs of Crown Failure

  • Cracks visible on the top of the stack
  • Leaking chimney during or after rainfall
  • Stains or damp patches near the fireplace
  • Falling debris or mortar inside the chimney breast

If you’re unsure, book a chimney inspection today and let us take a closer look before winter sets in.

FAQs

  1. What is a chimney crown?
    It’s the top layer of concrete or mortar that seals the chimney stack and protects it from rain and weather.
  2. Is the chimney crown the same as the flaunching?
    No – flaunching secures chimney pots, while the crown covers the stack top as a whole.
  3. How do I know if the crown is damaged?
    You might see visible cracks, water leaks, or damp spots inside near the fireplace.
  4. How long should a chimney crown last?
    Properly built crowns can last 25+ years, but weather exposure can shorten that lifespan.
  5. Can the crown be repaired or must it be replaced?
    Minor cracks can be sealed, but widespread damage often requires a full rebuild.
  6. Does insurance cover chimney crown damage?
    Sometimes, if it’s linked to storm damage – we can assist with documentation.
  7. Do you fit chimney caps?
    Yes – we highly recommend installing a cowl or cap for added protection.
  8. How long does crown repair take?
    Most chimney crown rebuilds are completed in 1–2 days.
  9. Is scaffolding required?
    For taller properties, yes – we’ll include this in your quote if needed.
  10. How do I get a quote?
    Contact us here to book a free inspection and quote anywhere in Bromsgrove.

 

By adminChimney Repairs Bromsgrove No comments yet
Brickwork or Flashing? The Real Cause of Your Chimney Leak in Bromsgrove

Brickwork or Flashing The Real Cause of Your Chimney Leak in Bromsgrove

Brickwork or Flashing? The Real Cause of Your Chimney Leak in Bromsgrove

Dealing with a chimney leak? Many homeowners assume the issue is with their roof, but more often than not, it’s the chimney itself – either the brickwork or the flashing. At Back to Back Roofing, we help property owners across Bromsgrove pinpoint and repair the real cause of chimney leaks – before they get worse.

If you’re unsure whether it’s time for chimney repairs in Bromsgrove, here’s what to look for and how we can help.

1. Damaged or Deteriorated Flashing

Flashing is the metal seal that connects the chimney base to your roof. Over time, lead flashing can crack, lift, or deteriorate, allowing rainwater to seep through and cause interior damp patches or ceiling stains.

2. Cracked Brickwork or Missing Mortar

Exposed brickwork can absorb moisture, especially when mortar joints start to fail. This leads to internal damp and even frost damage in winter. We offer full brickwork and repointing services to restore integrity and stop leaks at the source.

3. A Combination of Both

In many cases, the leak is caused by a mix of issues: compromised flashing *and* weakened masonry. We always conduct a full inspection before starting work to ensure all issues are addressed in one visit.

What Can Be Done?

  • Install or replace lead flashing
  • Repoint brick joints with weatherproof mortar
  • Seal or cap the chimney pot if needed

Need Expert Advice?

If water is entering your property near the chimney breast or attic, don’t ignore it. Get in touch with Back to Back Roofing today for a free site survey and quote anywhere in Bromsgrove.

FAQs

  1. How do I know if it’s the chimney leaking or the roof?
    Leaks near chimney breasts or water stains running down inside walls are often chimney-related. We’ll inspect and confirm the source.
  2. What is chimney flashing?
    It’s a lead barrier that seals the gap between your chimney and roofline to prevent water ingress.
  3. Can flashing be repaired or must it be replaced?
    We can patch small areas, but complete replacement is more effective for older or cracked flashing.
  4. How do bricks let in water?
    When mortar joints break down, water seeps through cracks, especially in heavy rain or frost.
  5. Can a leak cause internal ceiling stains?
    Yes – chimney leaks often lead to damp patches in lofts, ceilings, or upper walls.
  6. Do chimney leaks affect energy efficiency?
    Absolutely – leaks cause drafts and moisture that can reduce insulation performance.
  7. How long does a chimney flashing repair take?
    Usually one day or less, depending on roof access and weather.
  8. Do you guarantee chimney leak repairs?
    Yes – all work is guaranteed for quality and durability.
  9. What materials do you use?
    We use industry-approved lead flashing, weatherproof mortar, and high-quality bricks when needed.
  10. How do I book an inspection in Bromsgrove?
    Contact us here for a free quote and site visit.

 

By adminChimney Repairs Bromsgrove No comments yet
The Hidden Risks of a Worn Chimney Crown

How to Tell If Your Chimney Needs Repointing

How to Tell If Your Chimney Needs Repointing – A Bromsgrove Homeowner’s Guide

Is your chimney looking worse for wear? One of the most common issues we encounter at Back to Back Roofing is deteriorating mortar joints. Repointing your chimney not only restores its appearance but also protects your roof and interior from water damage. Here’s how to tell if it’s time for chimney repointing in Bromsgrove.

What Is Chimney Repointing?

Repointing involves removing old, crumbling mortar between bricks and replacing it with fresh, weatherproof mortar. This strengthens the structure, seals gaps, and prevents moisture from entering the chimney or surrounding roof areas.

Top Signs Your Chimney Needs Repointing

  • Visible cracks in the mortar joints
  • Loose or missing mortar between bricks
  • Dislodged bricks or flaking masonry
  • Plants or moss growing in the joints
  • Signs of damp or staining on interior walls

Why Repointing Matters

Ignoring chimney mortar damage can lead to collapsed brickwork, roof leaks, and expensive structural repairs. Our Bromsgrove team uses high-strength, weather-resistant mortar for long-term durability and aesthetic results.

Ready for a Professional Chimney Assessment?

If you’ve spotted any of these signs, get in touch with our team today for a free chimney inspection and quote across Bromsgrove.

FAQs

  1. What is chimney repointing?
    It’s the process of renewing the mortar joints between chimney bricks to prevent water ingress and structural damage.
  2. How do I know if repointing is needed?
    Look for gaps, crumbling mortar, or vegetation growing in the joints.
  3. How long does repointing last?
    High-quality chimney repointing can last 20–30 years when done professionally.
  4. Is repointing cheaper than rebuilding?
    Yes, repointing is a preventative measure that avoids the need for full reconstruction later.
  5. Will repointing stop chimney leaks?
    It can help significantly, especially when paired with flashing repairs.
  6. Do you offer chimney repointing in conservation areas?
    Yes, and we match existing mortar to retain the property’s appearance.
  7. Can you repoint in cold weather?
    We avoid frost conditions, but work can often continue through mild winter periods.
  8. How much does chimney repointing cost?
    It depends on size and access, but we offer competitive quotes across Bromsgrove.
  9. Is the work guaranteed?
    Yes, all repointing work includes a workmanship guarantee.
  10. How do I book an inspection?
    Contact us here to arrange a free site visit in Bromsgrove.

 

By adminChimney Repairs Bromsgrove No comments yet
Chimney Repairs in Bromsgrove – Why Winter is the Worst Time to Ignore Cracks

Chimney Repairs in Bromsgrove – Why Winter is the Worst Time to Ignore Cracks

Chimney Repairs in Bromsgrove – Why Winter is the Worst Time to Ignore Cracks

Winter weather can turn small chimney issues into costly structural problems. At Back to Back Roofing, we’ve seen firsthand how minor cracks in chimney stacks become major concerns during the colder months. That’s why now is the time to act if your chimney needs attention.

If you’ve noticed loose bricks, water stains, or crumbling mortar, don’t wait until it’s freezing outside. Our chimney repair team in Bromsgrove can carry out efficient, long-lasting fixes before the worst of the weather arrives.

What Winter Does to an Already Damaged Chimney

  • Freeze-thaw damage: Water seeps into cracks, freezes overnight, and expands – making the damage worse.
  • Frost attack on mortar: Weakened mortar joints can crumble entirely in sub-zero temperatures.
  • Increased damp and leaks: Snow and heavy rain can leak through loose flashing or broken crowns, causing internal moisture problems.

Preventive Repairs Save Money

It’s far more cost-effective to repoint mortar or replace flashing before winter than to rebuild a collapsed stack in spring. Our roofing experts will assess your chimney and carry out all necessary work using weather-resistant materials built to last.

Need Chimney Repairs This Season?

Whether it’s cracked flaunching, missing bricks, or chimney pot issues – we can help. Get in touch today to book a no-obligation inspection and quote in Bromsgrove.

FAQs

  1. Why is winter such a risk for chimneys?
    Water gets into cracks, freezes overnight, and expands – worsening damage with each cycle.
  2. Can you do chimney repairs during winter?
    Yes, but it’s best to do them before severe cold sets in for optimal results.
  3. What types of chimney repairs do you offer?
    We handle repointing, flaunching, chimney pot replacements, flashing, and full rebuilds.
  4. How can I tell if my chimney is leaking?
    Look for damp patches, peeling wallpaper, or water around fireplaces or ceilings near the chimney breast.
  5. Do you work on terraced or semi-detached properties?
    Yes, we carry out chimney repairs on all property types in Bromsgrove.
  6. What materials do you use?
    We use frost-resistant mortar, quality bricks, and industry-approved lead flashing.
  7. How long does a typical repair take?
    Most chimney repair jobs take 1 to 3 days depending on the size and access.
  8. Do you offer emergency services?
    Yes, we offer emergency chimney repair and roofwork when urgent issues arise.
  9. Is your work guaranteed?
    Yes – all chimney repairs include a workmanship guarantee for peace of mind.
  10. How do I book a survey?
    Contact us here to arrange a free quote and inspection at your property.

 

By adminChimney Repairs Bromsgrove No comments yet